“My daughter’s favorite color is purple, so I built her a purple rifle….”

Here’s a feel-good story about a family that shoots together, and a dad who did something very special for his daughter. All fathers create things for their children, but it’s unusual to find a Dad who has the skills (and motivation) to build a top-level competition rifle for his child. Our friend, Erik Cortina, did just that. Here is the story of the lovely purple maple F-Class rig Erik built for his girl Amberleeana.

My daughter would always tell me when I would go to a match, “Remember Dad, only Xs matter, the other stuff on the target is just there for decoration!” — Erik Cortina

A Father’s Gift: An F-Classer for Amberleeana

by Erik Cortina
My daughter Amberleeana has been wanting to shoot F-Class for a long time because I have been dragging her to matches since she was a little girl. She would come into my reloading room and watch me reload while she asked a million questions, all which I tried to answer to the best of my abilities. At age 9, she started hunting with a semi-custom rifle her grandfather gave her, a 6×47 Lapua built on a Remington 700 action with a Bartlein barrel. She has been very successful as a hunter so she decided to move to the next step and start shooting F-Class.

She shot my backup rifle before and she really enjoyed it. Here’s a YouTube video from a while back. This shows Amberleeana, at age 11, shooting at 500 yards for the very first time. You can see she does very well.

After hearing about the U.S. F-Class Under 25 (U25) Rifle Team selection trials in Raton this upcoming summer, Amberleeana wanted to try out for the U25 Team. I told her that was OK, but we had to modify the rifle she was currently using so that it could fit her better. After some consideration, I decided instead to sell that rifle and build her a brand new one.

Her favorite color is purple, so I built her a purple rifle with adjustable cheek piece and butt pad. Shurley Brothers (Austin, TX) crafted the stock from maple, and then applied a purple gloss finish. We think it turned out great. Amberleeana is eager to take the rifle to Raton this summer: “I would like to make the Under 25 U.S. Rifle Team and compete at the F-Class World Championship in Canada in 2017. My main focus now is on the upcoming team try-outs in Raton, New Mexico.”

I hope that my daughter enjoys F-Class as much as I have, which will allow us to spend more time together on the range and in the reloading room.

6.5×47 Lapua Load Development
The purple rifle is chambered for the 6.5×47 Lapua cartridge. Our preliminary load work up shows great promise using Vihtavuori N140 powder, 136gr Lapua Scenar bullets, and CCI 450 primers. We tried a variety of charge weights, starting at 35.7 grains of N140 and ending up at 38.2 grains. The photo below shows an initial series of 3-shot test groups at 120 yards. What do you think is the best node? What charge weight would YOU select among these? [Editor: That final load of 38.2 grains looks very good, but we would want to check for pressure signs and repeat with 10-round strings checking for ES and SD. Also, if you go by the vertical only, the 36.0 and 36.3 loads are worth further testing.]

Purple Rifle Specifications:
Stock: Shurley Brothers Lowrider XL stock (Maple)
(Finished by Shurley Brothers, bedded by Speedy Gonzalez)
Action: Kelbly F-Class Panda
Trigger: Flavio Fare
Barrel: Brux 32″-long, 1:8″-twist, 4-groove stainless, chambered in 6.5×47 Lapua
(Barrel work and assembly done by Erik Cortina)
Barrel Tuner: ECTuner (matches barrel contour)
Scope: Nightforce 15-55x52mm Competition
Front Rest: SEB NEO front rest
Rear Sandbag: Edgewood
Load: VV N140, 136gr Scenars, CCI 450 primers

Cartridge Choices for F-Class Competition

By Emil Kovan
Kovan Match Rifles LLC, www.matchrifles.com

There are hundreds of cartridge types capable of winning in F-Open. For F-TR you can shoot either the .223 Rem or .308 Win, but you have many load options. This article will focus on proven choices, currently used by the top F-Class shooters in the world. Our discussion will analyze cartridge selection based on the four different F-Class sub-disciplines: Open Mid-Range, Open Long-Range, F-TR Mid-Range, and F-TR Long Range.

Click image to view full-screen photo.

Mid-Range F-Open Cartridges

For starters, a .300 WSM is certainly capable of winning mid-range matches but it is not ideal. So what is ideal, and why? F-Class Mid-Range matches usually are usually shot at 300, 500, or 600 yards — or all three. At those distances the 6mm and 6.5mm cartridges rule. In moderate conditions, the 6mm Dasher is unbeatable. Its low recoil along with its super grouping ability and good ballistics make it my number one choice for Mid-Range.

Best bullets for the 6mm Dasher are: Vapor Trail 103gr, Berger 105 Hybrid, 108 BT, and 105 VLD (hunting). Best powders are: Varget, H4895, and Reloder 15.

Choices for Mid-Range in Tougher Conditions:
We all know that conditions are not always “moderate” that’s why something a little bit bigger will save you a “Nine” or two. The 6.5X47 Lapua was designed for 300-meter competition, but as soon as it was released, it was adopted by F-Class, benchrest, and tactical shooters. It offers great ballistics with very low recoil and big “accuracy window”. Lapua makes great brass for it (no surprise there) and Berger makes great bullets: 130gr VLD, 140gr VLD, 140gr Hybrids. Best powders in most barrels are Varget and H4350, I don’t use double-based powders such as Reloder 17 and the Vihtavuori N500 series because of their unpredictable performance day to day (greater temp sensitivity).

The 6.5X47 Lapua necked down to 6mm is also a great option for mid range matches. I was able to easily get 3200 fps with 105 hybrids and H4350.

Choice for Long-Range F-Open Competition

In Long-Range F-Open Class (out to 1000 yards), the big, high-BC bullets rule. If I had to pick one cartridge for F-Class (both mid- and long-range) I would pick the .284 Winchester or one of its variants. The .284 Win is currently dominating in F-Open competition. It offers great barrel life, it is super-easy to tune and its recoil is very manageable. The best bullets for it by far (in my opinion), are the Berger 180 Hybrids. But Sierra’s new 183gr MK bullet (with factory-uniformed meplats) seems to perform very well as does the Berger 180 VLD. Best powders for the .284 Win are H4350 and H4831SC.

Long-Range Only F-Open Cartridge
As much as I like the .284 Win, for long-range competitions I like the .300 WSM even more. If you look at a .300 WSM and a 6mm Dasher side by side, they appear almost identical in geometry — the .300 WSM looks like an “super-sized” Dasher. Both cartridges are currently the “darlings” of long-range benchrest due to their extraordinary grouping ability and huge “node’’ windows. Big accuracy windows allow loads to perform well in different conditions and geographical locations. That’s obviously very important if you travel to compete. The .300 WSM loaded with Berger 215gr or 230gr Hybrids is very tough to beat at long range, and it is currently my number one choice.

The 7mm RSAUM is another outstanding long-range round. It resembles a 6BR on steroids and it is almost as easy to tune. Best bullets for it are Berger 180gr Hybrids, 195gr EOLs, and Sierra’s 183gr MatchKing. Best powders for the 7mm RSAUM are: H4350, H4831SC, and VV N160.

Top Caliber/Bullet Combos for F-TR

In F-TR competition, the choice is clear — a .308 Win throated for Berger 185gr BTLRs and 200gr Hybrids will win in mid-range AND long-range comps. Many championships have been won, and many records set with those two bullets in the .308 Win. To quote Danny Biggs (a two times FTR National Champion) “The 185 BTLR is the best bullet for .308 Win ever made”.

The Berger 215gr Hybrids have been used to win many competitions including recently the 2015 F-Class Nationals. Bryan Litz won both the Mid-Range and Long-Range 2015 Championships using 215s. Bryan’s rifle is shown below:

I recommend chambers throated for the 185/200 grain projectiles over the 215/230 grain bullets. The reason is that if you have your barrel throated out for the 215s or the 230s, you could have a “slow” barrel and max out on pressure before the desired velocity is reached. Optimum freebore for the 230s is too long for the 185/200s, so you would be limited to using only 215/230gr bullets in that barrel.Furthermore, the recoil increase with heavier bullets is substantial, causing the rifle to be more difficult to shoot.

.223 Rem — Not A Competitive Option
I would stay away from the .223 Remington. On paper the 90gr VLD will shoot inside most .308 Win loads even at a 1000 yards. But in reality, on average, the .223 Rem, regardless of what powder/bullet combo is used, cannot compete with the .308 Win. [Editor: The equipment lists at major F-TR matches will confirm Kovan’s conclusion here.]

Conclusion (and Other Options)
This article covers only the (currently) most popular cartridge/bullet combos for F-Class (F-Open and F-TR). As I said in the beginning, many cartridge types are capable of winning but are not listed due to their low popularity, case design, or lack of quality components. All of the above information is based on my personal experience and it is meant to help new shooters choose the right cartridges for F-Class matches. Thanks for reading and good luck — Emil Kovan

Emil Kovan Competition History:

– 2014 F-Class Open National Champion

– 2015 F-Class Open National Championship, Silver Medal

– F-Class Open National Championship Teams, 2015, 2014, 2013, Shooting Team Member

– Over 15 wins in Regional and State Championships in Palma, F-TR, F-Open

– 2013 U.S. National Team Member

– 2017 U.S. National Development Team Member

PrecisionRifleBlog.com (PRB) recently published results from a field test PRB conducted to quantify the temperature stability of the popular Hodgdon H4350 and Varget powders and compare those to IMR’s new Enduron line of powders, specifically IMR 4166 and 4451.

Hodgdon Extreme Series powders have attracted quite a fan base, with over 90% of the top shooters in the Precision Rifle Series choosing to run one of those powders. IMR recently released a new line of powders “with Enduron Technology” — which is also marketed to have “extreme temperature stability”. Sounds familiar! These new powders should compete directly with the Hodgdon Extreme Series, which gives shooters more temp-stable powder options to consider.

CLICK HERE to Read Full Powder Temperature Stability Test on Precision RifleBlog.com.

The top shooters in the PRS and veteran long-range shooters in other disciplines have learned to value a temperature-stable powder. That’s because a change in temperature can affect the trajectory or “flight path” of the bullet in two well-known ways:

1. Assuming all other environmental conditions remain the same, an increase in air temperature will cause a flatter trajectory due to a lower air density (easier for the bullet to cut through the air).

2. The same increase in temperature also causes the nitrocellulose-based powder inside the cartridge to burn at a higher rate, producing approximately four times the Point of Impact (POI) shift than just air temperature alone. (SEE: Temperature Effects On Zero on KestrelMeters.com.)

“The initial heat condition of your powder will affect the burn rate,” Bryan Litz explained at a recent Applied Ballistics Seminar. That means swings in ambient outside temperature can affect your internal ballistics, which will directly affect your muzzle velocity, which will change your bullet’s trajectory. Some powders are more affected by changes in temperature than others. So if your goal is first-shot hits and you may shoot in a variety of conditions — you should care about temperature stable powders.

The folks at PrecisionRifleBlog.com meticulously loaded 6.5×47 Lapua ammo with each powder using some of the best equipment available. This included the top-of-the-line Prometheus Gen II Powder Scale, which is capable of loading to the nearest kernel of powder. This ensured the powder charges were identical for each round of ammo. PRB’s testers explain the full set of equipment and steps in their loading process in the Full Test Report.

Once they had a couple dozen rounds loaded with each powder, they went and shot them with each powder at 25° F, 65° F, and 140° F. The muzzle velocity of each shot was recorded using both a LabRadar Doppler Radar and a MagnetoSpeed Chronograph. The LabRadar is a new type of device that allows you to measure muzzle velocity within at least +/- 0.1% of the reading.

Here are the results from the PRB Powder Temp Stability Tests:

You can see Hodgdon H4350 had the least variance in muzzle velocity, with just 25 fps over the 115° swing in temperature! That is very, very low. Hodgdon Varget was the second least temperature sensitive powder in this test, with 46 fps of variance in muzzle velocity between temperatures of 25° F and 140° F. IMR 4166 performed very similar to Varget, and proved to be fairly insensitive to large swings in temperature. IMR 4451 had the largest swing in muzzle velocity of the powders tested, but keep in mind just 68 fps over 115° F swing is still a good performance.

Most powders aren’t specially formulated to be temperature stable. So they would likely show much larger swings than what these four top-performing powders showed.

PRB’s test team also noticed other interesting trends in the data. For example, variation in velocity does NOT appear to be linear across the full range of temperatures. By that, they mean the change per degree from 20° to 65° might be smaller or larger than the change per degree from 65° to 140°.

PRB’s testers talk about those things, provide a few other insightful views of the data, and discuss tools that can help you manage temp/muzzle velocity in the field in their full post. You can find that here: http://precisionrifleblog.com/2016/06/19/powder-temp-stability-hodgdon-extreme-vs-imr-enduron/

Yes, there are ten (10) shots. In the lower left (7 o’clock) of the group, two shots overlap!

Stunning 1000-Yard 10-Shot Group
You’re looking at a stunning feat of rifle accuracy. That’s a sub-3″, ten-shot group shot at 1000 yards, all 10s or Xs. Measured at 2.856 inches, this group by shooter Mike Gaizauskas works out to 0.2727 MOA. Nearly quarter-MOA for ten shots at 1K! And the vertical for 7 of 10 shots is under an inch. Now that’s impressive. This was done with an IBS Heavy Class Benchrest gun, chambered for the 6.5×47 Lapua, a mid-sized cartridge originally designed for 300m competition.

Gun Specs: 6.5×47 Lapua chambering, Krieger 30″, 1:8″-twist barrel, Lapua 139 grain Scenars, Hodgdon H4350, CCI BR4 primers, Nightforce NSX scope. Smithed by Mark King, stock by Mike Gaizaukaus.

This amazing group, which establishes new IBS world records, was shot at the Harry Jones Memorial 1000-Yard Gun Club range in Fairview, West Virginia. Set in wooded, rolling hills, this range is shielded on all sides by thick stands of trees. It’s a beautiful facility, and you can see why, when conditions are right, the Harry Jones range can be about as close to shooting in a “tunnel” as you’ll ever get at 1000 yards. The Harry Jones Club in WV hosted the 2014 IBS Long-Range Nationals.

Mike’s remarkable 10-shot performance may be a Score Record as well as a group record, because all ten shots were in the 10-Ring and, under IBS rules, group size is the tie-breaker, rather than X-Count. Mike’s target was scored 100-3X, with two of the three Xs just clipping the outside of the X-Ring. Match directors reported: “On 7/24/2016, two new pending IBS 1000-yard world records were shot by Mike Gaizauskas with a 6.5X47 Lapua: 1) Heavy Gun Group (2.856″) and 2) Heavy Gun Score (100-3X). Congratulations Mike!” Here are the listed IBS records that will be broken, when this target is certified:

► Current IBS 1000-Yard Heavy Gun 10-Shot Single Group Record: 3.044″, Joel Pendergraft, 4/18/2009.

► Current IBS 1000-Yard Heavy Gun 10-Shot Single Group Score Record: 100 points, with 3.353″ group size tie-breaker, Gary Nicholson, 7/27/13.

Best 1000-Yard 10-Shot Groups Ever
This jaw-dropping 2.856″ group by Mike Gaizauskas also handily breaks the current NBRSA 1000-Yard, ten-shot Heavy Gun Record, which was 3.9912″ set by Bill Johnston on November 17, 2015. FYI: IBS and NBRSA Light Guns only shoot five-shot groups, so there is no equivalent IBS or NBRSA Light Gun 1K ten-shot record.

Only one other 10-shot, 100-score 1000-yard group was better than this in the history of rifle competition on this planet. Back in 2010, at a Williamsport match, Matt Kline shot a 2.815″ 100-4X. Depending on how Mike’s 2016 2.856″ group is finally measured, it could end up smaller than Matt’s. The difference (before final IBS verification) is only 0.041″, a mere four hundredths of an inch.

In 2014, Jim Richards fired a 10-shot Light Gun group at 1000 yards initially measured at 2.6872″. Shot under Williamsport Rules at the Deep Creek Range in Montana, that 10-shot group may be the smallest ever at 1K. However, the whole group was out in the 8 Ring, for a score of 80, not 100.

About the 6.5×57 Lapua Cartridge

To learn more about the record-setting 6.5×47 Lapua cartridge, including bullet and powder options and reloading tips, visit our comprehensive 6.5×47 Lapua Cartridge Guide.

The 6.5x47mm Lapua was developed in 2005 as a precision cartridge for 300m CISM rifle matches. Lapua (of Finland) and Swiss rifle-maker Grünig & Elmiger created this new cartridge to match the “pure accuracy” of the 6mmBR, but with even better ballistics. Following its debut as a 300m match cartridge, the 6.5×47 has proven to be a popular “jack of all trades”. Shooters have adopted this efficient, mid-sized cartridge because it offers excellent accuracy, mild recoil, good ballistics, and ample barrel life (plus it feeds well from a magazine). The 6.5×47 Lapua has won two NBRSA 600-yard Nationals. Now that this modern, mid-sized cartridge has set an all-time record for grouping precision at 1000 yards, we expect more shooters to experiment with this cartridge in the mid- and long-range benchrest disciplines.

On some internet shooting forums, self-declared “experts” advise new rifle shooters to stick to low-end factory rifles. These “experts” (many of whom don’t own a single really accurate rifle), claim that it will take years for a new shooter to learn how to shoot a rifle accurately. So, the argument goes, the accuracy offered by a precision-chambered rifle, with a custom barrel, is “wasted” on a new shooter.

We disagree with that viewpoint, at least when it comes to rifles shot from a rest. We’ve seen relatively new shooters, with help from a skilled mentor, do remarkably well with precision rifles right from the start. With a good bench gun, many new shooters can shoot well under 1 MOA on the first day. Certainly it takes time for a complete novice to learn how to handle the gun and to work the trigger smoothly. However, this editor has personally seen some inexperienced shooters try their hand at benchrest shooting, and within few month they are doing very well indeed at club shoots.

Accurate Rifles Reward Progress As Novices Build Skills

For bench shooting, we think a highly accurate rifle is a much better training device for a new shooter than a typical, cheap factory sporter. With a gun capable of 1.5-2.0 MOA at best, you can never really determine if a “flyer” is you or the gun. Conversely, when a novice shoots a gun that can put 5 shots through one ragged hole, if a shot goes way high or low, the shooter knows his aim, trigger control, or gun-handling is to blame. He (or she) can then correct the problem. And when the shooter does everything right, he or she will see a nice tight group on the target. The accurate rifle provides more meaningful feedback and it rewards progress. That helps the novice become a better shooter in a shorter period of time.

A while back, Forum Member Preacher and his “bunny hugger” niece from California proved this point. The young lady, with almost no shooting experience, took Preacher’s 6-6.5×47 and shot a sub-quarter-MOA, 3-shot group at 350 yards. Don’t tell her she needs to stick to a cheap factory rifle. Preacher reports: “My niece flew in from the west coast and came up to visit. When she saw a few of my full-blown varmint rifles, she wanted to shoot one. She did a super job even if she IS a ‘bunny hugger’. She pulled the 1.5 ounce Jewell on a few fired cases to check out the trigger pull and then got in behind the gun and put three shots into a 350-yard target with a one-inch circle.” We measured her group at 0.822″ (0.224 MOA). Don’t tell Preacher that accuracy is “wasted” on novices. He joked: “I sure don’t want her shooting at me ….”

Rifle Features BAT Action, Krieger Barrel, and Russo Laminated Stock:

For those who are interested, Preacher’s rifle features a BAT 3-lug action, 30″ Krieger 7.5-twist heavy contour barrel, and Russo stock (with clear coat by Preacher). Chambered in 6-6.5×47 Lapua, this gun “shoots the 108gr Bergers very well” according to Preacher. Yep, we agree with that — even when a novice “bunny-hugger” does the trigger-pulling.

Forum member Bill Goad’s 6XC II Hunter Rests in a Whitetail Rack taken this past year.

One of the most popular items in our Shooters’ Forum is the ongoing “Pride and Joy” thread. Since 2009, Forum members have posted photos and descriptions of their most prized rifles. Here are some of the most recent “Pride and Joy” rifles showcased in our Forum. Do you have a gun you’d like to see featured there? Just Register for the Forum and you can add your favorite gun to the list.

TT Freestyle’s Husband and Wife Borden Benchrest Rifles

Here’s a pair of “His and Hers” rigs delivered by Santa in December. Forum member TT Freestyle reports: “After our rookie year in Short Range Benchrest with good used equipment, my wife and I decided we liked it enough to get two new Bordens for Christmas!”

FalconPilot’s Fabulous F-Classer in Shurley Claro Walnut Stock

This beauty belongs to Forum member FalconPilot. He tells us that his “Lastest F-Classer features a Shurley Brothers SOD stock in beautiful Claro Walnut.” Components include Bat M action, Bix-N-Andy trigger, and Nightforce Comp scope. FalconPilot has several barrels for this Open-Class rig, including tubes chambered for .284 Win and 6mm Dasher.

Eric’s Blacktical .308 Win for Precision Rifle Series

Forum member Eric32 spent months building out this rifle, “getting it to work just right for PRS”. Designed for practical/tactical matches, this rugged rig features a blue-printed Rem 700 action (with 1.5-lb 40X trigger) in an XLR Element chassis. On the end of the .308 Bartlein 5R barrel is a JP brake. Other components include: PiG skins barricade grips, Atlas Bipod, and GGG bungee sling. On top is a SWFA HD 5-20x50mm optic with Vortex scope level and custom throw-lever.

Willow’s “Lightning Bolt” Hydro-Dipped F-Open Rifle

Forum member Willow reports: “Here is my new F-Open gun. It features a hydro-dipped LowBoy stock and LH Barnard Model P action with ‘V’ bedding block. The barrel is a straight profile 32″, 1:8.5″ twist Bartlein 5R, chambered in 280AI by Matt Paroz”. On top is a Vortex 10-60x52mm Golden Eagle in a Spuhr 3001 mount. Willow says his lightning bolt rig is a shooter: “After 42 rounds through the barrel, I’m liking what I am seeing so far”. Check out that trick aluminum base for his rear Edgewood bag.

Stinnett’s 6.4×47 Lapua Tactical Rig

Forum member Stinnett tells us: “This is my third 6.5×47 Lapua rifle — the 6.5×47 is the best cartridge ever! I’m not a huge fan of muzzle brakes. I look at them as tools — use the correct tool for the job. The ’47 doesn’t need a brake. .308 Winchester and up need muzzle brakes. For this rifle, I’m going to start out with 123gr Scenars and Reloder 15. I also like to shoot the 123gr SMKs and Varget. The SMKs are much less seating-depth sensitive. Very easy to find a load! Also gonna try the Berger 130 Hybrids and H4350.”

Components: McMillan A5 adjustable stock in GAP Camo, Stiller TAC 30 A/W action, Jewell HVR trigger, Badger bottom metal and DBM, Atlas Bipod, Nightforce NXS F1 3.5-15×50 with MLR 2.0 reticle. Metal has been Cerakoted graphite black.

6mm BRX Benchgun with Home-Made Cherry/Redheart Stock

You have to give credit to a guy who crafts his own custom wood stock. This 6mm BRX benchgun features a custom-built laminated stock featuring Cherry wood with vivid Redheart pieces on the sides and Redwood Burl on the buttplate. The front of the stock is 4″ wide. The action is a Benchrest Borden RBLP Right Eject unit, with custom titanium scope rings on top. Owner Erick C. is proud of this stock, saying it is “the best one I’ve built so far”. We agree it’s a beauty.

6.5 Creedmoor vs. Other Mid-Sized 6.5mm Cartridges
The 6.5 Creedmoor is a very popular cartridge with the tactical and PRS crowd. This mid-size cartridge offers good ballistics, with less recoil than a .308 Winchester. There’s an excellent selection of 6.5mm bullets, and many good powder choices for this cartridge. When compared to the very accurate 6.5×47 Lapua cartridge, the 6.5 Creedmoor offers similar performance with less expensive brass options. For a tactical shooter who must sometimes leave brass on the ground, brass cost is a factor to consider. Here’s a selection of various 6.5mm mid-sized cartridges. Left to right are: 6.5 Grendel, 6.5×47 Lapua, 6.5 Creedmoor with 120gr A-Max, 6.5 Creedmoor with 142gr Sierra MK, and .260 Remington.

When asked to compare the 6.5 Creedmoor to the 6.5×47 Lapua, Rifleshooter.com’s Editor stated: “If you don’t hand load, or are new to precision rifle shooting, get a 6.5 Creedmoor. If you shoot a lot, reload, have more disposable income, and like more esoteric cartridges, get a 6.5×47 Lapua. I am a big fan of the 6.5×47 Lapua. In my personal experience, the 6.5×47 Lapua seems to be slightly more accurate than the 6.5 Creedmoor. I attribute this to the quality of Lapua brass.” But now that Lapua is producing top-quality 6.5 Creedmoor brass with small primer pockets, we could have a “second generation” 6.5 Creedmoor that rivals ANY mid-sized cartridge for efficiency AND accuracy. We will soon know how well the 6.5 Creedmoor cartridge performs with Lapua brass.

The first shipment of Lapua 6.5 Creedmoor brass has arrived in the USA. It features a small flash hole and small primer pocket. We have some for testing…

New Lapua 6.5 Creedmoor Brass Field Tests Soon
Our friends at 65Guys.com will be testing the new Lapua 6.5 Creedmoor brass next week. The goal will be to determine if Lapua’s new Small Primer Pocket/Small Flash Hole brass allows higher velocities than American-made brass (Hornady specifically). In addition the 6.5 Guys want to see how well the new Lapua brass holds up after dozen (or more) firing cycles. They’ll hammer the new brass pretty hard to see how it fares with repeated stout loads. Stay tuned…

Here are three tables from the Sierra Bullets Reloading Manual (5th Edition). IMPORTANT — This is just a sample!! Sierra has load data for many other 6.5mm bullet types, including FB, Spitzer, SBT, HPBT, and Tipped MK from 85 grains to 142 grains. To view ALL 6.5 Creedmoor DATA, CLICK HERE.

INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.

INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.

INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.

Do you shoot a mid-sized match cartridge, such as the 6.5×47 Lapua, or 6.5 Creedmoor? Then here’s a great deal for you. Right now you can get 123gr Nosler HPBT match bullets for just $20.49 per hundred. These are on sale as “factory seconds” with cosmetic blemishes, such as water spots. But they are otherwise fine bullets, and your targets will never notice the blemishes.

We prefer bullets in the 120-130 grain weight range for the mid-sized 6.5mm cartridges. While you give up a little BC compared to the 140s, the lighter bullets seem to be easier to tune and often group tighter. You can also get significantly higher velocities with a 120-grainer compared to a 140-grainer. The extra velocity may allow you to reach a higher accuracy node. With our .260 Rem, we got consistently better inherent accuracy with 120gr bullets running at a high node, compared to the slower moving 140s. YMMV, but we think it’s worth trying these Noslers at just $20.49 per box — half the price of some other premium 130gr 6.5mm match bullets.

Bullets in the 120-grain range often shoot very well in all these cartridge types. And they may be easier to tune than 140-grain class 6.5mm projectiles.

The verdict is in — Lapua’s new 6.5 Creedmoor brass is ultra-tough and very consistent. So sayeth the 6.5 Guys, who recently field-tested the brass, loading it to very stout levels. Even after 20 reloadings, the Lapua 6.5 CM brass held up extremely well. This brass, with its small primer pocket and small flash hole, really does out-perform other 6.5 Creedmoor brass offerings. Yes the Lapua brass is pricey, but it outlasts the alternatives, and, if the 6.5 Guys test is any indication, you can run higher velocities with this brass compared to other brands. Watch the 6.5 Guys Lapua brass test in this video:

If you have a 6.5 Creedmoor rifle, or are considering getting a gun chambered for this cartridge, we strongly recommend you watch the full 6.5 Guys Video. Ed and Steve spent a lot of time conducting this test, and the video includes helpful summaries of their findings.

The Evolution of the 6.5 Creedmoor
Over the last few years the 6.5 Creedmoor cartridge has become increasingly popular among precision rifle enthusiasts. However, availability of brass cases was limited to only a few manufacturers. In early 2017 Lapua introduced to the market its own 6.5 Creedmoor case with a unique twist — the case has a small rifle primer pocket and small flash hole — like the 6mmBR Norma and 6.5×47 Lapua.

Lapua 6.5 Creedmoor Brass — Test Protocol
The 6.5 Guys tested a box of Lapua 6.5 Creedmoor cartridge brass supplied by Graf & Sons. The project involved two phases. First the 6.5 Guys weighed and measured the cases to assess weight uniformity and dimensional consistency (which was impressive). Then came phase II — the “torture test”. The 6.5 Guys loaded the brass with a very stout charge of H4350 pushing 140gr Hornady ELD bullets*. The brass was loaded and shot over 20 times. This durability test was conducted to see how many repeated firings and resizing/reloading cycles the brass could handle. Remarkably, after 20+ loadings, the brass was still holding up — no “blown-out” primer pockets. This stuff is tough. The 6.5 Guys note: “You can go at least 20 reloadings without a split neck…but brass spring-back may be another issue.”

After 20 Load Cycles — Going to the Extreme
Once the Lapua cases had been shot 20+ times, the 6.5 Guys tried something more extreme. They stuffed the brass with a very hot load — a powder charge weight well beyond a sensible maximum. Even with this “beyond max” load, the Lapua brass held up but there was some evidence of pressure on the primers: “You do see some cratering on the primer with a Remington 700 that you don’t see with a Defiance action, but nothing to indicate a potential pierced primer.”

WARNING: The 6.5 Guys deliberately used a very stout load for testing. Do not attempt to duplicate. This load was shot in a faster-than-average barrel with a chamber set up for long 140gr bullets. You may not be able to achieve similar velocities — maybe not even close. As with all hand-loading, always start low and work up charges in small increments.

6.5 Creedmoor vs. 6.5×47 Lapua — Battle of the Middle-Weights
With this new brass, does the 6.5 Creedmoor enjoy an edge over the 6.5×47 Lapua? The 6.5 Guys answer: “That’s hard to say. From a market share standpoint, the 6.5 CM is more popular in the USA. From a technical perspective, 6.5×47 Lapua offers near identical performance with better barrel life. But from our tests, you can drive a 140-grain bullet much faster with 6.5 Creedmoor than you ever can (safely) with a 6.5×47 Lapua. That’s our non-answer answer….”

The 6.5 Guys concluded that the 6.5 Creedmoor will enjoy a velocity advantage: “We’ve had a number of discussions with RBros and other folks about this. It appears that 6.5×47 still has the edge as far as barrel life. But it also looks like you can push a 140gr bullet pretty fast with the 6.5 CM — speeds that are not obtainable with the 6.5×47 Lapua.”

* Why were the Hornady 140gr ELDs chosen for testing? The 6.5 Guys wanted a bullet in the 140gr weight range. Beyond that, the choice was fortuitous. Ed explained: “Our bullet selection was quite scientific — we sat down at my reloading bench and looked around. Saw the Hornady 140 ELD Match and decided to roll with that.”

What does a two-time High Power National Champion choose for PRS comps? A set of twins. Twin rifles that is. SFC Brandon Green of the USAMU is one of America’s best marksmen. He’s excelled in Service Rifle and High Power disciplines, and now he’s getting very serious about the Precision Rifle Series (PRS). Brandon recently took delivery of “Twins” — two impressive rifles optimized for PRS competition. Green told us: “The Twins are ready for business! The silver one is a 6XC and the black one is a 6.5×47 Lapua”. Both rifles feature Impact Precision actions (with AICS-type mags), 24″ Proof stainless barrels, and Fat Bastard muzzle brakes. Rifle work was done by Stuteville Precision (Wade Stuteville) and Exodus Rifles (Joe Walls).

In the 6XC, Brandon runs Berger 105gr VLDs in Norma 6XC brass. For the 6.5×47 Lapua he shoots 140gr Berger Hybrids or 143gr Hornady ELD-Xs in Lapua brass. Both rifles have stainless steel Proof barrels, but the 6.5x47L has a matte black Cerakote finish.

Brandon loves his new Twins. He said he likes the “feel” of the guns with the Foundation stocks: “These rifles weigh around 17 pounds with optics. They feel very solid under recoil — without the ‘tuning fork’ vibration you can get with a metal-chassis gun. They feel like a good wood-stocked gun, but the material is stronger and more rigid than wood. I’ve heard that guys are having success with these Foundation stocks with the actions installed without pillars or conventional bedding.” Currently Brandon is running both guns without action-screw pillars. He did have one skim-bedded, but he doesn’t think that was really needed. “Both rifles hammer now”, Brandon tells us.

Green Runs Vortex Razor HD Gen II 4.5-27x56mm FFP scopes on both rifles:

High-Tech Micarta Stock Material
At first glance, those stocks may look like wood, but they are actually a special “Micarta” material that is strong, durable, and stable. Micarta, often used for knife handles, is a “a brand name for composites of fiberglass, carbon fiber, or other fabric in a thermosetting plastic.” The stock-maker, Foundation Stocks, says Micarta offers some distinct advantages over laminated wood or conventional fiberglass: “The solid block of material gives us a dense, homogenous material that is absent of any voids or air pockets commonly found in composite stocks. The high compression strength of the material allows us to build an action/DBM specific stock that requires no bedding or pillars. The material is very durable and stable in extreme environments. We use advanced CAD software to design and model our stocks, working in conjunction with action manufacturers and rifle builders to provide exact fitment.”

Here is a close-up of a Foundation Stock showing the distinctive Micarta texture:

Tactical Competition vs. NRA High Power Competition
Brandon says PRS competition is tough: “PRS can be pretty humbling, but it’s been a lot of fun and a great challenge. For a shooter (like me) with a Service Rifle/High Power background, the variations in stages combined with the time limits can be very challenging. And the unusual shooting positions put a new spin on things. PRS is definitely a different ball game, but I really enjoy it. After the National Championships this summer I hope to shoot three or four PRS matches in September and October.”

SFC Brandon Green honored as the 2015 High Power National Champion.

Life before the Twins… Here is Brandon, with his previous PRS rig, at the MasterPiece Arms Precision Rifle Shootout, a PRS event at the CORE Shooting Solutions Range in Florida:

With all the noise lately about the 6.5 Creedmoor, it’s easy to forget that before we had the Creedmoor, we had another accurate, efficient mid-sized cartridge, the 6.5×47 Lapua. Just as the 6.5 Creedmoor inspired the 6mm Creedmoor, the 6.5×47 Lapua has been successfully necked-down to 6mm (.243) for a 6-6.5×47 variant. This has worked great in a number of roles — benchrest, varminting, and tactical/PRS. This article, from a few seasons back, shows how the 6-6.5×47 Lapua can be successfully packaged as an accurate, potent 6mm varminter.

The 6-6.5×47 Lapua for Precision Long-Range Varminting

Report by Stan Stewart

6mm AI ‘Sellers Remorse’ Spurs New 6mm Project
After selling my 6mm Remington Ackley Improved a couple of years ago and wishing I had not, I thought about a new customer rifle for work on Prairie Dog towns and New York wood chucks at 600+ yards. I have a .223 AR and 22-250 for medium ranges but I missed my 6mm AI for long-range work. The 22-250 is a fine chambering, but it is hard on barrels, and I think the 6mms may have an accuracy edge out past 400 yards. Also, shooters today enjoy a vast collection of really great 6mm bullets. Barrel life and bullet ooptions were two main reasons I decided to build a 6mm rather that another .224-caliber gun. But the question remained — what 6mm chambering to choose? Although I missed my 6mm AI, I did not miss fire-forming the brass, so when I learned about the 6-6.5×47 Lapua, a wildcat case easily formed by necking down the parent 6.5×47 case, I thought this might be the answer.

I started doing serious research on the 6-6.5×47 Lapua. I received a lot of good advice from AccurateShooter.com and other websites on the pros and cons of the new cartridge. Most reports were positive. I also talked to gunsmiths — quite a few recommended the new cartridge as well. Some of the cartridge attributes I liked were the small rifle primer, enough case capacity to efficiently reach 3700 fps with a 70gr bullet and 3400 fps with an 85-grain, without being terribly over-bore.

Most important was the 6-6.5×47’s reputation for inherent accuracy without being finicky like my 6mm AI (my experience). So, having chosen my cartridge, I started asking for gunsmith recommendations. Again the folks on the AccurateShooter Forum were very helpful. After many conversations I settled on Dave Bruno in Dayton, Pennsylvania. He was a good choice. After working with Dave on this project, I could not be happier. He was very helpful considering this was my first complete custom gun.

Putting Together the New Rig with Premium Components
From the get-go, I knew I wanted a BAT action and Krieger barrel. BAT Machine and Krieger Barrels enjoy a great reputation in the shooting industry. BATs are beautifully machined, smooth, and strong. Krieger cut-rifled barrels are known for dependable accuracy and long barrel life. While many 6-6.5×47 shooters choose a 8-twist barrel to shoot the 100-108gr bullets, I would be using smaller, varmint-weight bullets, so I selected a 1:10″-twist Krieger. This would allow me to shoot bullets from 60 grains up to 90 grains. Dave chambered the barrel with an 0.269″ neck and fluted the barrel to save weight. I also had Dave install a Vais muzzle brake. The Vais brake is more expensive than some others, but it is a proven product. Dave fitted the BAT with a 2 oz. Jewell trigger, mounted with a +20 MOA scope rail, then pillar-bedded the BAT into a McMillan Hunter-Class-style fiberglass stock. The scope is a 12-42x56mm Nightforce NSX, mounted in a set of Nightforce rings I hand-lapped for better contact.

Load Development for Varminting
I had selected a few powders and bullets recommended by other 6-6.5×47 shooters and started by seating all the bullets .005″ off the lands. The powders I selected were Varget, Vihtavuori N550, and Reloder 15.

I was very pleased with the 88gr Bergers. In initial testing, they grouped well and I was able to drive them to 3400 fps easily. As I wanted a gun for long-range varmint work, I was hoping the 10-twist barrel would provide enough stability for the heavier weight bullets. It did — the 10-twist worked great! I was able to shoot the lighter weight bullets very well and the 88s were superb. With a BC of 0.391, leaving the barrel at 3400 fps, these bullets were still traveling at 2600 fps at 600 yards!

I did wonder how well the 88s would work on varmints given their small meplats (and limited expansion). A call to Berger reassured me the 88s should work fine on small varmints. The test came last summer when I made a trip to NY and got to visit my old Chuck hunting farms with my new rifle and old hunting buddy. The longest shot we had was only 300 yards, but the Berger 88s did great. None of the eight critters we nailed so much as wiggled after they were hit.

I did a lot of testing, recording group sizes for a variety of different bullets and powders. With all the data collected in a spreadsheet, I was able to “crunch the numbers”, and that helped me choose my preferred loads. By looking at the average group size for the individual bullets and powders, the data drew a clear picture of what the rifle shot best. Below is a chart showing comparative group sizes, arranged by both bullet type and powder brand.

READ Full Article with Bullet Chron Data and Accuracy Chart »

Lyman Products is offering a new reloading resource, the Lyman “Long Range Precision Rifle Reloading Handbook”. With the growing interest in Precision Rifle Series (PRS) events and Extended Long Range matches, Lyman saw the need for an up-to-date, reliable print resource for precision long range competitors. Lyman says this is “The first-ever reloading manual specifically written for the growing sport of precision long range shooting.”

Lyman’s new book covers the most popular cartridge types, and the premium components used by top shooters. The book covers the vast majority of popular cartridge types used in long range precision shooting. You’ll find .223 Rem, 6mm Dasher, 6×47 Lapua, 6XC, 6mm Creedmoor, .243 Win, 6.5×47 Lapua, 6.5 Creedmoor, .260 Rem., 6.5-284 Norma, .308 Win, .300 Win Mag, .300 Norma Mag, .338 Lapua Mag and more. The data section includes Berger and Lapua target bullets, as well as Sierra MatchKings and Hornady ELDs. A wide range of propellants from Accurate, Alliant, Hodgdon, IMR, Norma, VihtaVuori, Ramshot, and Winchester are reviewed.

Lyman Handbook Includes Articles by Leading Experts and Top PRS Shooters
The new handbook also includes articles by top PRS shooters and industry experts. Articles such as “PRS How-To” and “Rifle Systems for PRS” by Matt Gervais provide expert info and tips and techniques to start competing. An authoritative article by Hornady’s Dave Emary, “The History and Design of the 6.5 and 6mm Creedmoor” explains why these cartridges have become so popular for PRS and other applications. Emary’s “Reloading Considerations for Long Range Ammunition” is also highly recommended for both novice and experienced hand-loaders.

“As the leader in reloading data, we saw a need for an accurate and reliable source of reloading data for these precision, long-range loads,” said Trevor Mullen, Lyman’s Global Marketing VP. “Our process of compiling a new reloading handbook … is to work with the best in their field — reloaders, the manufacturers of ammunition and rifles, participants in the PRS sport, and our own staff of highly-skilled, highly knowledgeable test shooters. This new handbook [will help] those looking for that edge in PRS competitions.”

The “Long Range Precision Rifle Reloading Handbook”, priced at $16.98, will be available soon from online retailers. Within a short time you can also purchase the book from the Lyman web store. (It is not yet in stock).

This video, produced for the folks at S&S Precision in Argyle, Texas, shows a full custom 6.5×47 bench rifle being crafted from start to finish. It is a fantastic video, one of the best precision rifles video you’ll find on YouTube. It shows every aspect of the job — action bedding, chambering, barrel-fitting, muzzle crowning, and stock finishing.

You’ll be amazed at the paint job on this rig — complete with flames and four playing cards: the 6, 5, 4, and 7 of spades. Everyone should take the time to watch this 13-minute video from start to finish, particularly if you are interested in stock painting or precision gunsmithing. And the video has a “happy ending”. This custom 6.5×47 proves to be a real tack-driver, shooting a 0.274″ three-shot group at 400 yards to win “small group” in its first fun match. NOTE: If you have a fast internet connection, we recommend you watch this video in 720p HD.

A couple seasons back we published our comprehensive 6.5×47 Lapua Cartridge Guide, researched by the 6.5 Guys. In case you’ve been wondering what kind of accuracy is possible for a tactical-type rifle chambered for this mid-sized cartridge, check out this tack-driver built by gunsmith Ryan Pierce. That’s a mighty impressive 0.206″ five-shot group fired with Berger 140gr Hybrids using a Brux cut-rifled barrel. The powder was Hodgdon H4350, a very good choice for this cartridge.

Ryan reports: “Here is a 6.5×47 I built for a customer. It features a trued Rem 700 action, Brux 1:8″ Rem varmint-contour barrel, Mcmillan thumbhole stock, Surgeon bottom metal, and 3-port muzzle brake. The customer’s preferred load is the same that has worked in the last couple dozen 6.5x47s I’ve built: 41.1-41.3 grains of H4350 with 140 hybrids .050″ off the lands. This should run about 2810-2815 fps from a 26″ barrel. The 3.128″ refers to length of a loaded round from the base to ogive including the Hornady ogive comparator tool.”

Yep, It Measures Up…
Lest anyone dispute Ryan’s measurement of this group (the internet is full of nay-sayers), 0.206″ is EXACTLY what we got when we measured this group using OnTarget software. See for yourself:

Our friend Kevin Nevius, best known for his smallbore skills, went head to head against the nation’s top long-range aces this past week, and emerged on top. Besting the likes of past multi-time Long Range Champions David Tubb and John Whidden, Kevin Nevius shot superbly at Camp Atterbury to win his first NRA National Long Range Championship. Kevin finished with 1245-64X, one point ahead of Phillip Crowe, 1244-74X. Bob Gill, shooting a .223 Rem with iron sights, was third on X-Count, with 1244-68X. Kevin built his own rifles for the match, using Kelbly centerfire actions in a Grunig & Elmiger smallbore stock. Here is Kevin’s first-hand report of his 2018 LR Championship victory.

Click Here for 2018 NRA High Power Long Range Championship Full Results

2018 NRA Long Range Championship — Rising to the Challenge

by Kevin Nevius
This was my first opportunity to shoot the NRA Long Range Nationals since its relocation to Camp Atterbury, and it was great to see everyone and get back to the matches. It is always so humbling walking onto the range and seeing all of the people I read about and admire so much. I can’t think of another sport where people so accomplished will share so much and be so helpful.

Regarding the weather, we had generally great conditions with very mild winds in the mornings, building gradually as the days progressed. By the afternoon hours, there were certainly challenges as the air started moving. Obstructions to the wind on either side of this range vary, so you needed to pay attention for sure — it may be calm at the targets or firing line, only to show something to worry about on the mid-range flags. Mirage is my primary indicator shooting smallbore, but mirage over 5/8ths of a mile is a little less telling (and a lot more confusing, at least for me!). I think most competitors, including me, use some combination of mirage and flags to make corrections. At the start of the string, I try to gauge a predominant condition, and more importantly which indicator is the most reliable to look at to determine that condition.

Smallbore shooting is where I learned to build a good position, and so much of that carries forward to Long Range High Power. It was a huge shock though, the first time I looked at a 44” aiming black through aperture sights at 1000 yards! Smallbore aiming blacks are twice as big, at one tenth the distance — the fact that we can hit something at 1000 yards with that sight picture still amazes me!

Kevin’s Arsenal — 6.5×47 Lapua and .308 Win Barreled Actions in Smallbore Stock
I have always build my own rifles, and always struggled to get the individual rifles you need for the LR aggregate (Any and Palma) and smallbore to feel, balance and fit identically. This year for the first time, I machined bedding blocks that allowed me to put almost identical centefire barreled actions into my smallbore prone stock – effectively making the position and fit of all the rifles for all disciplines identical (it is, after all the same stock used for everything).

I used two modified Kelbly Grizzly actions (one barreled in 6.5×47 for the any rifle matches, and one barreled in 308 for Palma) fitted to two identical aluminum bedding blocks. The bedding block footprint matches my smallbore barreled action – a Grunig & Elmiger Racer WC. The stock is a Grunig & Elmiger Hybrid, which is a composite aluminum skeleton and carbon fiber skin.

Championship-Winning 6.5×47 Lapua and .308 Win Loads
I was using a 6.5×47 Lapua in the “Any Rifle” matches. The barrel is a 1:8″-twist Benchmark medium Palma contour finished at 35 inches, throated +0.060″. My 6.5×47 load was Lapua brass, CCI 450 primers, VV N160 powder, and 140 grain Berger Hybrid bullets. For the Palma match, a .308 Win barreled action was fitted in the same Grunig & Elmiger smallbore stock. The .308 barrel was another Benchmark 35″ medium Palma, using the current Fullbore chamber throated +0.120″. I was using Lapua .308 Palma small primer brass, Federal 205M primers, VV N140, and 155 grain Lapua Scenar L bullets.

Shooting Between Champions — Tubb on the Left, Whidden on the Right
On the final day (the Palma Individual), we were squadded based on seed position, so David Tubb was on my left, and John Whidden on my right. I am not sure if a more intimidating position on the firing line exists, but it was so clear to me especially on that last day how blessed I was to be there. In every match, there is an element of luck — regarding weather, squadding assignment, target service, firing point condition, even equipment malfunction. A host of things can go wrong…

I lost my very first shot at 900 mostly due to elevation (I was coming a little unhinged with the realization I might be in the lead – just being completely honest!), and settled down to clean the remainder of the string. The wind had built by then, and would run both right and left with the small boils in between. At 1000 I lost two, and was pretty happy with that. It was getting pretty dicey, and I resigned myself to the fact that it was becoming one of those days where 10s were enough (and Xs were pure luxury!). John shot well at 1000, but he always does — I don’t think there is a better long range shooter in the country and it’s been that way for a bunch of years. I can’t say enough about him – he is a dear friend and everything a champion should be. (Editor: Whidden finished fourth overall, at 1243-78X, with high X-count for the event.)

To put it all together takes so many things — preparation, tuning, load development, position practice. And yes, it takes some divine intervention for sure. I will never forget this experience, and am so grateful to have been successful this year.

John Whidden of Whidden Gunworks congratulated Kevin: “I was really proud of my friend Kevin Nevius and his fine shooting over the match. Kevin is respected both for his shooting and his character. The match went well and a number of improvements were made over last year. The targets were better, the number boards better, and the match ran very efficiently. Kudos to those who made these positive changes happen.”

Tough Time for Tubb on Last Day
Kevin noted that it was intimidating to be squadded between David Tubb and John Whidden, two multi-time Champions. Unfortunately Tubb, who had shot brilliantly (800-50X) throughout the Long Range event, had issues with his .308 Palma rifle on the final day. Kevin noted: “Yes David had some problems with his .308. When we arrived at the range on the last day, for the Palma Individual, David was in the lead with 800-50X, having shot ‘clean’ (not dropping a point). Bob Gill was second with 798-43X, and I was in third place with 798-42X. As we started the 800-yard string, there was some commotion going on to my left, and all I know is that as we finished and started moving to 900 yards, David was not happy. I believe he had lost 4 points at 800. We went to the pits, and he said his rifle was not shooting well, and he was pretty unhappy to say the least. He tried to adjust the seating depth of his ammunition before heading back out to the 900-yard line, in the hopes the gun would shoot better”. But it ended up a very tough day for David, as his chances for another LR Championship vanished.

Editor: With a 800-50X total, David Tubb was the Winner of the Canadian Cup Trophy, earned before the last day.

Bob Gill Proves the .223 Remington (and Iron Sights) Can Be Competitive
There were many interesting stories at this year’s Long Range Championship. The .223 Rem Eliseo Tubegun belonging to Californian Bob Gill proved to be “the little rifle that could”. Gill shot his .223 Rem Palma rifle for the entire Long Range Championship cycle. And yes Bob shot irons the whole way, even during the Remington and Wimbledon “Any Sight” matches where scopes are allowed. Kevin observed: “Bob Gill was amazing, and that rifle must be pretty awesome too. I don’t think I have ever seen someone shoot a .223 Rem at 1000 yards that well — ever. I believe Bob was shooting 80 grain bullets. As I pulled for Gill on the third day, I can testify that his bullets were still plenty supersonic!”

Editor: Gill finished 3rd overall, just one point down from Kevin, and six Xs behind runner-up Phillip Crowe. Gill also won the Sierra Trophy.

CLICK HERE for all NRA 2018 National Championships Results

Jerod’s Tactical Trio
Many guys are lucky to have just one accurate tactical rifle fitted with a custom barrel and high-end optics. Well forum member Jerod (aka Stinnett1981) has three!

Jerod calls his tactical trio the “Three Amigos”. All are built with Manners Composite stocks and Bartlein barrels. But there are three different chamberings. In order below (from top to bottom) are: .308 Win (Bartlein 5R, 1:10″ twist); .223 Rem (Bartlein 5R, 1:8″ twist);,and 6.5×47 Lapua (Bartlein 5R 1:8.5″ twist). Read on for a full description of each build.

The tan rifle is Jerod’s .308 Winchester. It has a Manners T4A stock, trued Rem 700 SA, Badger M5 DBM, and Bartlein 5R 10-twist HV contour finished at 23″. The optic is a Bushnell XRS 4.5-30X50mm FFP with G2 reticle scope.

The Green rifle is a .223 Remington. This has a Manners T4 stock, trued Rem 700 SA, Badger M5 DBM, and Bartlein 5R 8-twist HV contour finished at 23″. On top is a Nightforce NXS F1 3.5-15X50mm FFP with MLR 2.0 reticle scope. Jerod says: “This scope and reticle are awesome.”

The Black rifle is chambered for the 6.5-47 Lapua. Components are: Manners T4A stock, Stiller TAC 30, Badger M5 DBM, Bartlein 5R 8.5-twist bull barrel (1″ at muzzle) finished at 26″. The scope is a Nightforce NXS 8-32X56mm with NP2DD reticle.

What Comes Next — A Rimfire Maybe?
While Jarod’s Three Amigos make up a very impressive tactical troika, we’d like to see one more rifle added to the mix — a .22 LR rimfire rig, set up with a similar stock. That would be perfect for low-cost cross-training, or competition in Rimfire Tactical matches. Jerod could build the “fourth Amigo” using a rimfire action. Here is just such a rifle, built by Brian of GA Precision with a modified Rem 40X action in a Manners T4A stock (matching Jerod’s centerfire stocks). Pretty cool eh?

Could This Be the Fourth Amigo? 40X Rimfire in Manners Stock

Brian, a gunsmith at GA Precision, built this rimfire rig with GAP colleague Anthony Soukup.

Click Photo to View Larger Image

Here is Ernie Bishop’s pride and joy, a specialty pistol nicknamed “Batman” because the black carbon-fiber stock looks like the Batmobile. This is one sophisticated handgun. Complete with scope, the Batman pistol weighs under 7.5 pounds, thanks to the ultra-light stock. The carbon stock is 6 inches wide at the fore-end, yet weighs just one pound. Ernie tells us: “This gun shoots amazing and is easy to shoot especially with my SEB MAX Rest.” Ernie adds, “The gun will soon also have a field-usable rear-grip stock so I can shoot it prone from a bipod as well.”

The Batman pistol is chambered for the 6mm “Long Dasher”, a 6mm 40°-shouldered variant of the 6.5×47 Lapua. Ernie loads Berger 105gr Hybrid bullets pushed by Hodgdon H-4350 powder.

Gun Specifications
The gun, crafted by Eric Wallance of Nawaka Firearms, features an XP-100 action, Jewell trigger, and 15″-long, Brux 1:8″-twist barrel with aluminum muzzle brake. Interestingly, this gun does not have a traditional recoil lug. Instead, gunsmith Wallace milled out a lug from the bottom of the XP-100 action to save weight. On top of the action, the rig carries a Sightron Inc S-III 6-24X56mm scope in Kelbly rings on a custom +20 MOA rail.

Long Dasher Wildcat
Shown at right is a “Long Dasher” 40° wildcat created by Forum member Sunbuilder. This is very similar to Ernie Bishop’s chambering, though there may be small variations related to reamer design (such as freebore). Sunbuilder’s 6-6.5×47 Improved (aka “Long Dasher”) reamer was made by Dave Kiff of Pacific, Tool & Gauge. This wildcat cartridge adds about 2.0 grains capacity to the 6.5×47 necked down to 6mm. The case certainly is impressive with that 40° shoulder. We’re just waiting for the tactical guys to starting run this improved cartridge with its original 6.5mm bore.

Here are three FIVE-shot groups at 500 yards, shot by Ernie’s Batman pistol. The first is marked with pink dots, the second with green dots, and the third is being measured with calipers:

Soon after Lapua released the 6.5×47 cartridge, wildcatters recognized the potential of a necked-down 6mm version of the case. The 6-6.5×47 has emerged as a great, do-it-all cartridge that performs well in High Power competition, 600- and 1000-yard benchrest, and PRS tactical matches. But the 6-6.5×47 is not just for paper-punching. An efficient cartridge with great inherent accuracy, the 6-6.5×47 can be an excellent, flat-shooting, long-range varmint round. Here we feature Stan Stewart’s BAT-actioned 6-6.5×47 varminter. Fitted with a Krieger 1:10″ barrel, Stan’s rifle excels with a wide variety of varmint bullets. Whether driving 70-grainers at 3700 fps, or pushing the Berger 88gr High-BC FB bullet at 3400 fps, this 6-6.5×47 delivers half-MOA (or better) accuracy, in a well-balanced, easy-handling rifle.

The 6-6.5×47 for Precision Long-Range Varminting

The rifle carries a 12-42x56mm Nightforce NSX in Nightforce rings “hand-lapped for optimal fit/alignment”.

‘Seller’s Remorse’ Spurs 6mm Project
Report by Stan Stewart
After selling my 6mm Remington Ackley Improved a couple of years ago and wishing I hadn’t, I begun to think about a new custom rifle for work on Prairie Dog towns and New York wood chucks at 600+ yards. I have a .223 AR and 22-250 for medium ranges but I missed my 6mm AI for long-range work so I started asking questions.

The 22-250 is a fine chambering, but it is hard on barrels, and I think the 6mms may have an accuracy edge out past 400 yards. Also, shooters today enjoy a vast collection of really great 6mm bullets. Barrel life and bullet options were two main reasons I decided to build a 6mm rather than another .224-caliber gun. But the question remained… what 6mm chambering to choose?

I started doing serious research on the 6-6.5×47. I received a lot of good advice from AccurateShooter.com and other websites on the pros and cons. I also talked to gunsmiths — quite a few recommended the new cartridge as well. Some of the cartridge attributes I liked was the small rifle primer, enough case capacity to efficiently reach 3700 fps with a 70gr bullet and 3400 fps with an 85-grainer without being terribly over-bore. Most important was the 6-6.5×47’s reputation for inherent accuracy without being finicky like my 6mm AI. So, having chosen my cartridge, I started asking for gunsmith recommendations. Again the folks on the AccurateShooter.com Forum were very helpful. After many conversations I settled on Dave Bruno in Dayton, Pennsylvania. He was a good choice.

Putting Together the New Rig with Premium Components
From the get-go, I knew I wanted a BAT action and Krieger barrel. BAT Machine and Krieger Barrels enjoy a great reputation in the shooting industry. BATs are beautifully-machined, smooth, and strong. Krieger cut-rifled barrels are known for dependable accuracy and long barrel life. While many 6-6.5×47 shooters choose an 8-twist barrel to shoot the 100-108gr bullets, I would be using smaller, varmint-weight bullets, so I selected a 1:10″ twist Krieger. This would allow me to shoot bullets from 60 grains up to 90 grains. Dave chambered the barrel with a .269″ neck and fluted the barrel to save weight. I also had Dave install a Vais muzzle brake. Dave fitted the BAT with a 2 oz. Jewell trigger, mounted a +20 MOA scope rail, then pillar-bedded the BAT into a McMillan Hunter-Class-style fiberglass stock.

Load Development for Varminting

I had selected a few powders and bullets recommended by other 6-6.5×47 shooters and started by seating all the bullets .005″ off the lands. The powders I selected were Varget, Vihtavuori N-550, and Reloder 15.

I was very pleased with the 88gr Bergers. In initial testing, they grouped well and I was able to drive them to 3400 fps easily. As I wanted a gun for long-range varmint work, I was hoping the 1:10″-twist barrel would provide enough stability for the heavier weight bullets. It did — the 10-twist worked great! I was able to shoot the lighter weight bullets and the 88s were superb. With a BC of 0.391, leaving the barrel at 3400, these bullets were still traveling at 2600 fps at 600 yards!

I did a lot of testing, recording group sizes for a variety of different bullets (see below) and powders. With group size/velocity data in a spreadsheet I was able to “crunch the numbers” and choose my preferred loads. The data drew a clear picture of what the rifle shot best. Here is a chart showing comparative group sizes, arranged by bullet type. On the last three lines, powders are listed by average for all bullets.

Final Thoughts on the 6-6.5×47 Lapua
I have owned three rifles chambered in 22-250 and will always own a rifle in this caliber because it is inherently accurate and drives a 50gr bullet at 3800 fps. No question the 22-250 can be deadly out to 500 yards. However, I’ve found that shooting past 400 yards with the light bullets is difficult if there is any wind at all. That’s why I liked my 6mm AI for those longer shots and why I decided on the 6-6.5×47 Lapua. I couldn’t be happier with my choice. The only thing that could make it better is if Lapua would produce the 6-6.5×47 as an “official” factory 6mm cartridge with 6mm necks right out of the box. But overall, I am very happy with the cartridge, and I thank Dave Bruno for producing a superbly accurate varmint rifle.

CLICK HERE for FULL Story with 6-6.5×47 Load DATA »

“My daughter’s favorite color is purple, so I built her a purple rifle….”

Here’s a feel-good story about a family that shoots together, and a father who did something very special for his daughter. All fathers create things for their children, but it’s unusual to find a Dad who has the skills (and motivation) to build a top-level competition rifle for his child. Our friend, Erik Cortina, did just that. Here is the story of the lovely purple maple F-Class rig Erik built for his girl Amberleeana. We first ran this story in 2016. Now Amberleeana is a bit older and she has competed successfully with her purple rifle.

My daughter would always tell me when I would go to a match, “Remember Dad, only Xs matter, the other stuff on the target is just there for decoration!” — Erik Cortina

A Father’s Gift: An F-Classer for Amberleeana

by Erik Cortina
My daughter Amberleeana had been wanting to shoot F-Class for a long time because I have been dragging her to matches since she was a little girl. She would come into my reloading room and watch me reload while she asked a million questions, all which I tried to answer to the best of my abilities. At age 9, she started hunting with a semi-custom rifle her grandfather gave her, a 6×47 Lapua built on a Remington 700 action with a Bartlein barrel. She has been very successful as a hunter so she decided to move to the next step and start shooting F-Class.

She shot my backup rifle before and she really enjoyed it. Here’s a YouTube video from a while back. This shows Amberleeana, at age 11, shooting at 500 yards for the very first time. You can see she does very well. (Editor’s NOTE: She is now three years older, and has completed more matches.)

After hearing about the U.S. F-Class Under 25 (U25) Rifle Team selection trials in Raton in 2016, Amberleeana wanted to try out for the U25 Team. I told her that was OK, but we had to modify the rifle she was currently using so that it could fit her better. After some consideration, I decided instead to sell that rifle and build her a brand new one.

Her favorite color is purple, so I built her a purple rifle with adjustable cheek piece and butt pad. Shurley Brothers (Austin, TX) crafted the stock from maple, and then applied a purple gloss finish. We think it turned out great.

I hope that my daughter enjoys F-Class as much as I have, which will allow us to spend more time together on the range and in the reloading room.

6.5×47 Lapua Load Development
The purple rifle is chambered for the 6.5×47 Lapua cartridge. Our preliminary load work up shows great promise using Vihtavuori N140 powder, 136gr Lapua Scenar bullets, and CCI 450 primers. We tried a variety of charge weights, starting at 35.7 grains of N140 and ending up at 38.2 grains. The photo below shows an initial series of 3-shot test groups at 120 yards. What do you think is the best node? What charge weight would YOU select among these? [Editor: That final load of 38.2 grains looks very good, but we would want to check for pressure signs and repeat with 10-round strings checking for ES and SD. Also, if you go by the vertical only, the 36.0 and 36.3 loads are worth further testing.]

Purple Rifle Specifications:
Stock: Shurley Brothers Lowrider XL stock (Maple)
(Finished by Shurley Brothers, bedded by Speedy Gonzalez)
Action: Kelbly F-Class Panda
Trigger: Flavio Fare
Barrel: Brux 32″-long, 1:8″-twist, 4-groove stainless, chambered in 6.5×47 Lapua
(Barrel work and assembly done by Erik Cortina)
Barrel Tuner: ECTuner (matches barrel contour)
Scope: Nightforce 15-55x52mm Competition
Front Rest: SEB NEO front rest
Rear Sandbag: Edgewood
Load: VV N140, 136gr Scenars, CCI 450 primers

Eric told us that he really likes that Flavio Fare trigger: “The FF trigger is outstanding. It is much smoother than a 1.5 oz Jewell trigger and more consistent as well.”

The New 6GT Cartridge for Precision Rifle Competition

Report by Vu Pham
Earlier this year I was ready to build a 6 Dasher when I saw a lot of buzz on the interwebs about a new caliber George Gardner (Owner of GA Precision) and Tom Jacobs (Owner of Vapor Trail Bullets) designed, the 6GT. After some research and talking to George, I ditched the 6mm Dasher build and had GA Precision build me a 6GT on a GAP Templar action I already had in the safe. The reasons to try the 6GT in a new PRS-style rig were as follows:

1. Push a 110-115 grain class bullet at 2880-2930 FPS safely in the Sacramento heat.

2. Achieve a load that is reliable and predictable. The caliber must be easy-to-tune and predictable from barrel to barrel. I don’t want to spend weeks developing a new load each time I spin on a fresh barrel.

3. Be able to run the same mag in all my guns without having to tweak or use mag kits. The round must feed from AICS and AW magazines without major tweaking or hiccups.

4. Get good barrel life. The barrel needs to go 2200-2500 rounds with match-grade reliability and accuracy.

5. Have a competitive cartridge with the least possible recoil without sacrificing too much performance down range, compared to bigger options like the 6mm Creedmoor.

6GT feeding from un-modified magazines has been flawless in all the rifles we tested. The 6GT feeds so well, I sometimes have to do a press check to ensure there is a round in the chamber.

On paper the 6GT seemed like the perfect cartridge for PRS- and NRL-style competition. It has the low recoil of a 6 Dasher, with good feeding and mag compatibility. With the 6GT, a competitor can push 105gr bullets at 3000+ FPS or run heavier bullets at 2800-2900+ FPS.

Knowing that I would initially have to make my own 6GT brass and do quite a bit of load development, I enlisted the help of Dan Bertocchini with CS Tactical. Dan has a lot more experience with wildcats and is the man when it comes to this type of data gathering. He has been running a 6 Dasher for a few years so I was curious how he would compare the 6GT to his 6 Dasher.

Quick Summary: “I am really digging the 6GT and the capabilities it offers. It can launch 103gr Vapor Trails at 3000+ FPS or lob heavy 115gr DTACs in the low-to-mid 2900s comfortably. I think we will see this cartridge go mainstream in PRS/NRL-style competition in 2020.” — Vu Pham

Alpha Munitions Pre-Production 6GT Brass
George Gardner was kind enough to send us 50 pieces of Pre-Production Alpha 6GT brass for preliminary testing. Like the cases I formed from 6.5×47 Lapua brass, the Alpha 6GT brass will use a small rifle primer. Price from Alpha Munitions should be $1.15 per case, which is on par with Alphan’s other product line.

The first 7000 pieces of Alpha 6GT brass sold before I could even get my hands on any! The bigger batch of production brass is due later this year. To pre-order the brass, CLICK HERE.

The major difference between 6.5×47 Lapua-formed brass and Alpha 6GT brass is the case capacity. Alpha 6GT brass has 1.5 to 1.7 grains more case capacity. When a piece of 6.5×47 Lapua brass is formed into a 6GT, the walls of the case now become the shoulder and part of the neck. In a normal piece of brass, the shoulder and neck are typically thinner because of the thickness of the brass tapering from the body to neck.

While the cartridge design was optimized for Hodgdon Varget, the extra case capacity of the Alpha 6GT brass opens the door to Hodgdon H4350 (my favorite powder) and Alliant Reloder 16.

Test Results with Alpha Munitions 6GT Brass
Initial test results were as expected from a premium brass-maker. Dan and I both got excellent Standard Deviations and Extreme Spreads over my MagnetoSpeed V3 and his LabRadar. This string below was with 112gr Barnes Match Burners and 33.8 grains of Varget. Can’t complain about a 3 FPS Extreme Spread!

Yes, H4350 Works with the Alpha Munitions Brass
Personally, I prefer running Alpha 6GT brass with H4350 rather than Varget pushing a heavier bullet. H4350 burns slower and cleaner which should equate to better barrel life. The Lapua-formed 6GT cases just do not have the capacity to reach the cartridge’s full capability with the slower burning powders.

Is the 6GT cartridge accurate? Definitely. Here is a 5-shot group at 600 yards shot by Dan. This was Alpha 6GT brass, with Hodgdon H4350 pushing Barnes 112gr Match Burner bullets.

And here is a 4-shot, 600-yard group with reformed 6.5×47 Lapua brass, using Varget powder under a Barnes 112gr Match Burner.

6GT Stress Test — Don’t Try this at Home!
Dan and I also did a “destruction test” to see how the Alpha 6GT brass would hold up when competitors push the cartridge to its limits. Please note that this is PRE-PRODUCTION brass and Dan and I probably exceeded max load for the majority of the duration of this test. Using Varget powder, we pushed 115gr DTACs at 2950+ FPS on a pretty hot day. We ran the charge weight up until the bolt was hard to lift.

Using this very hot charge, we were able to get 14 firings before the primer pocket failed. That is pretty solid considering that this brass was a pre-production sample that Alpha said did not meet its primer pocket design requirements. With these results, I think a shooter pushing 110-115 grain class bullets in the low 2900s will get 16 to 20 firings from a piece of brass.

Is the GT here to stay?
All signs are pointing to “Yes”. Dies are readily available from Hornady, RCBS, and Redding. Chamber reamers are being produced by PT&G and JGS that can be purchased through GA Precision.

Alpha Munitions is hard at work getting quality brass to the shooters. Quite a few people have already chambered up 6GT barrels before they even have brass in hand. I think we will see this cartridge go mainstream in PRS/NRL-style competition in 2020. With Alpha Munitions production brass almost ready to hit the shelves, I think we will see a lot more data come in from the field by the end of this year.

The Verdict — The 6GT Is Looking Great So Far
I am really digging the 6GT and the capabilities it offers. It can launch 103gr Vapor Trails at 3000+ FPS or lob heavy 115gr DTACs in the low to mid 2900s comfortably. George Gardner has texted me some pictures of very impressive groups pushing an 115gr DTAC at 3000 FPS with Alliant Reloder 16 (a very temp-stable powder with a burn rate close to H4350). That being said, if a guy wanted to push that type of speed and bullet weight, the 6mm Creedmoor is a better solution in my opinion. So far my “go to” 6GT load is a 112gr Barnes Match Burner at 2900 FPS. My other favorite load is a Hornady 108gr ELDM at 2970 FPS.

I think the down-range performance of the 6GT over a 6mmBR and the 6BR variants will be valuable on those days where shooting conditions are not as perfect. Recoil is about the same as the 6BR variants (6BRA, 6 Dasher etc.), but noticeably less than a 6mm Creedmoor. The extra energy down range will make a spotter’s job a bit easier when targets extend beyond 800 yards.

Forming GT Brass from Lapua 6.5×47
Before the new Alpha Munitions brass was available, I tested the cartridge using 6GT made from parent Lapua 6.5×47 Lapua brass necked-down and reformed. George Gardner walked me through the process of forming 6GT brass out of Lapua 6.5x47L. The process is time-consuming and is a huge PITA even with the correct tools. More detailed instructions can be found on my 6GT thread on the AccurateShooter Forum. READ Forum Thread HERE.

Here is a photo of what the brass looks like going through the forming/trimming process.
Left to right: 6.5×47 Lapua brass, sized with the 6GT bushing die with a .266 bushing, chopped/trimmed and turned, and fired-formed.

The formed-from-Lapua 6GT brass performed well and is a good option if one has the time and desire, but I’ll be moving over to factory Alpha Munitions brass once it is readily available.

6GT Tested at 1000 Yards
After seeing what Tom Jacobs is doing with his benchrest gun running Alpha Munitions brass, there is no doubt the 6GT is plenty capable out to 1000 yards and beyond. I have a feeling the Benchrest and F-Open guys are going to dig this new 6mm cartridge as well, at least for 600 yards. Note, in this photo it appears Shot #5 is under a paster, but that might just be a Ballistic-X software input error, meaning that this is actually a 4-shot group. Either way it is still impressive.